Graphics Settings Required for Leica Geosystems Programs
Required Graphics Setting that need to be set manually for all programs.
SMART PLAN
Category / Cyclone REGISTER360
This topic covers how to use all the features in REGISTER360 including import data, registration, and deliverables.
Advanced UCS Tools in REGISTER360
The Advanced UCS tools are accessed in the Setup or Bundle Cloud. Users can set the UCS by Pick, Plane or Corner. By Pick and Corner give users the option to enter in a specific reference point. Watch the following video by Brian Elbe to […]
Using Basic UCS Tools in REGISTER360
This video by Brian Elbe outlines the basic UCS Tool found in the SiteMap of the project. After importing the data, before setting the UCS, click the letter A on the keyboard to display the world UCS. It is located on the first scan setup. […]
Extracting Targets and Registering Data to Control
This video by Brian Elbe covers extracting targets and registering the data to control. It also shows how to finalize a project, edit and publish the registration report and point cloud data.
Finalizing Registration of RTC360 Data in REGISTER360
This video by Brian Elbe shows how to check the registration results, lock links and determine the closure error. It also covers how to check the alignment of the point cloud using TruSlicer and change the Slice Thickness, Location and Direction.
Importing RTC360 into REGISTER360
Learn how to import data collected on a RTC360 scanner using VIS and see the benefit of the onboard GPS with SiteMaps in the video by Brian Elbe This video also covers: Basic versus Advanced mode of reporting registration information Bundles Links Setup Clouds TruSlicer […]
Setting Up a Project in REGISTER360
Watch the following video by Brian Elbe to learn the basics of REGISTER 360 including adjusting the Settings and managing Projects and Storage.
Using Multiple SiteMaps in REGISTER 360
Using Multiple SiteMaps in REGISTER 360 is a great way to separate data into smaller groups. Data registered in one bundle can be separated into separate SiteMaps and links can be created to navigate between them in TruView. Multiple SiteMaps is also a great tool […]
CLM Installation v2.7.x Embedded Help Videos
Installation of the Client License Manager (CLM) program is required to use Leica Geosystems programs. After installing the CLM program, make sure you are connected to the internet, open the CLM program, and activate your EID numbers for your software programs. A green bar indicates […]
BLK360 Check Calibration Tests
There are a couple of ways to validate that your BLK360 is operating accurately. Remember it is always recommended to send in your instrument annually to the Leica Geosystems Service Center for calibration. Calibration Field Check Of the two tests that can be done, the […]