Pxx-Series White Papers by Greg Walsh
Walsh Trilogy of Pxx White Papers. PDF Documents Shared.
SMART PLAN
Category / Scanners
Category to host all BLK RTC C10 Pxx Hardware items.
BLK360 Check Calibration Tests
There are a couple of ways to validate that your BLK360 is operating accurately. Remember it is always recommended to send in your instrument annually to the Leica Geosystems Service Center for calibration. Calibration Field Check Of the two tests that can be done, the […]
FTCoE 2022: Guidelines for the Use of Terrestrial LiDAR Scanners in Criminal Justice Applications
The FTCoE has previously produced reports that outlined selection and basic operation of laser scanners for forensic applications. These recommendations were foundational outlines of recommended practices to be incorporated into scanning workflows. The March 2022 FTCoE report is updated and includes technical definitions and revised […]
Virtual Training Resources for Public Safety (PSG) HDS and Map360 basic course registration and overview virtual training.
This video provides important URL links to six key training sites uses for 3D Scanning and Map360 virtual learning. New public safety users should review and follow the registration instructions to sign up for their first two public safety courses: PSG 1 Laser Scan Operator […]
RTC360 Video Series-7 Videos Basic Operation
From myLearning are 7 videos from the RTC360 course covering basic operation of the RTC360 scanner.
7_RTC360 VIS-What the Cameras See?
The Visual Inertial System (VIS) tracks positions in the environment as it moves from one position to another. This video shows how it works as it moves from an outside position through a corridor. Note: The RTC360 LT does not have VIS technology and this […]
6_RTC360 Fourth Setup Manual Alignment
04:02 Manual alignment of a scan without using VIS technology. Typical of RTC360 LT workflow where all scans come in at 0,0 center of the screen. Video covers visual alignment. A key reminder is to all Cyclone Field 360 workflow is to ensure you align […]
5_RTC360-Third Setup using GeoTags
A GeoTag is a specific 3D location that can have an image or other digital asset assigned to it. GeoTags can be created in field with CF360 on the tablet and will automatically be pushed into Cyclone Register 360. Existing GeoTags can be edited in […]
4_RTC360-Second Setup and Linking Scans with Cyclone Field 360
Cyclone Field 360 (CF360) is an application loaded to a tablet or phone and connects via WIFI to the RTC360 scanner. This field application allows the user to control the scanner, create registration links, add GeoTags, take measurements, and annotate scan data.
3_RTC360 – First Setup and Moving the Scanner using VIS
VIS (Visual Inertial System) uses 5 cameras and the IMU to track the scanners movement from one scan position to the next and aids in automated field alignment. Cyclone Field 360 use on a tablet is not required for VIS to operate and provide an […]